The short version: in campaigns with a Sales or Leads objective (and, according to Meta's help pages, Engagement and App promotion too), many accounts can no longer exclude placements at ad set level. Meta decides where the ad runs. What you control now is the creative, so build every ad to work vertically (9:16), in the feed (4:5) and as a square (1:1), with everything important in the middle of the frame.
What has Meta changed about placements?
Advantage+ placements is Meta's name for automatic placements. The ad can appear on Facebook, Instagram, Messenger and Audience Network, in feeds, Stories, Reels and other surfaces, and Meta spreads your budget wherever it expects the cheapest result. Until recently you could untick what you didn't want, say Audience Network or all of Facebook. In Sales and Leads campaigns that choice is now disappearing from the ad set.
Let me be clear about what I know and what I don't. The sources disagree on which objectives are affected: some say only Sales and Leads, while a summary of Meta's help page also lists Engagement and App promotion. Awareness and Traffic keep manual selection. The rollout is also gradual, so your account may look different from mine. Open Ads Manager and check for yourself.
In practice it looks like this:
- Gone at ad set level: excluding individual placements or whole platforms, limiting delivery to mobile or desktop, and limiting it to one operating system.
- Still there at account level: under Advertising Settings and Account Controls you can exclude placements for the whole account, and lately per campaign objective too.
- Value rules: you can raise or lower your bid for certain placements, but only for a handful (seven, as far as I've read, Audience Network included). That's a dimmer, not an off switch.
Meta's reasoning is that cost per result falls when the algorithm distributes the budget itself. The figure that gets quoted is around 10 %, and it comes from Meta's own experiments. Expect it to hold on average, not necessarily in your account.
Why is this a production problem?
Because the old shortcut is gone. If you had a 16:9 video and nothing vertical, you could switch off Stories and Reels and carry on. Now the ad can end up there anyway. According to Meta, an ad doesn't deliver in placements where its assets aren't supported, and where it does deliver, Meta crops or pads the image itself, often with a blurred background or with text that lands under a button. So you either get less reach than you could have had, or an ad that looks careless.
That makes extra formats a requirement, not a luxury. They decide whether the algorithm has anything to work with on the surfaces where people actually spend their time. I've written about how to build creative that earns attention in ad creative that works, and about how much of the targeting the creative now does in Advantage+ on Meta.
Which formats do you actually need?
You don't need five versions of every ad. My rule of thumb is two main formats and a fallback:
- 9:16 (1080 × 1920): Stories and Reels, where a large share of the time is spent.
- 4:5 (1080 × 1350): the Facebook and Instagram feeds, where the ad takes the most room on a phone.
- 1:1 (1080 × 1080): a fallback that works almost everywhere.
- 1.91:1 (1200 × 628): still used for link ads. Spend time on it only if you know you need it.
Specs and recommendations change, so check Meta's current format guide before you put money into production. What you can do right now is open the preview for each placement in Ads Manager. It shows exactly how the ad gets cropped, before you've spent a cent.
How do you make one ad that works in every format?
Start from the vertical format and treat the rest as cut-outs of it. A 1080 × 1920 image or video contains a 4:5 version (the middle 1,350 pixels of height) and a square (the middle 1,080 pixels). That gives you a simple rule:
Everything that has to be seen goes in the middle square. The face, the product, the message and the logo. In a 1080 × 1920 frame that is roughly rows 420 to 1,500. If it's there, it survives every crop.
Remember the interface sitting on top, too. In Stories and Reels, Meta's own buttons, account name and captions cover the top and bottom of the frame. Meta states its margins in its format guides, in the region of 14 % at the top and 20 % at the bottom for Stories, and more at the bottom for Reels. So text belongs in the upper half of the square rather than at the very bottom. Double-check the numbers with Meta, since they get adjusted now and then.
A few habits that make it easier:
- Shoot with some extra room above and below the subject, so the vertical version can be extended without cutting anything important.
- Caption your videos and keep the captions inside the square, because many people watch with the sound off.
- Export 9:16 and 4:5 from the same project file. Change the crop and the text position, not the idea.
- Use the setting that lets you upload different assets per placement (placement asset customisation). Upload 9:16 for Stories and Reels and 4:5 for the feed, so you don't have to trust Meta's automatic cropping.
If you want help with the production itself, you can set up a routine where one idea becomes every format in one go. That's exactly what I do in ad production.
When should you still keep control?
Here's the caveat. For many small advertisers, losing manual selection matters less than it sounds. Fewer splits give the algorithm more data to learn from, which usually helps when the budget is small. But there are cases where you should act:
- One placement eats budget and delivers nothing. Open the breakdown by placement for the last 30 days. If Audience Network takes a big share of spend and gives you zero conversions, exclude it at account level or lower the bid with a value rule.
- Brand or regulatory requirements. Account controls remain for companies that can't appear everywhere for legal or policy reasons.
- You run Awareness or Traffic. From what I've read, you can still choose placements yourself there.
Don't drag the control back in without a reason. Measure with your own number first, such as cost per lead per placement, and act on that. If you want to see where you stand with your advertising overall, the quick analysis takes two minutes, and you can read more about how I work with accounts under Meta Ads.
What to do now
- Open Ads Manager and check whether you still see the placement choice in your Sales and Leads campaigns. That tells you whether your account is affected.
- Look at the breakdown by placement for the last 30 days and note where the money actually goes.
- Open the preview for each placement on your three most-shown ads and see how they get cropped.
- Make your next ad in 9:16 with everything important in the middle square, and export 4:5 from the same file.
- Upload the right version per placement instead of letting Meta crop it.
- Exclude a placement at account level only when you have numbers showing it doesn't work.


